NEW ACCEPTED IEC STANDARDS IN THE IECEE CB-SCHEME

GUIDELINES

The Member NCB(s) of the IECEE are the sole Organizations in conjunction with their associated CBTL(s), in the field of the IECEE operations, entitled to apply to operate the relevant IEC standard(s), edition(s) and amendment(s).

When National Differences exist against the relevant IEC standards, it is the responsibility of the Member NCB(s) to declare such status for each standard/edition(s)/amendment(s) and provide details of such National Differences by sending an email with the details to the IECEE Secretariat.

The Member Body is required to endorse the National Differences, Special National Conditions, Group Differences, by being copied in the email sent to the IECEE Secretariat. Regulatory Requirements shall be declared under the responsibility of the NCB.

IECEE Member NCB(s) are kindly requested to provide this information in electronic format (MSWord).

The Member NCB(s) “Scope Extension Request” can be declared/requested either by using the:

*Note: The Fast Track Extension request requires an application that shall be addressed to the IECEE Secretariat according to draft OD-CB2007 as applicable.

**Note: The Scope Extension request requires an application that shall be addressed to the IECEE Secretariat according to OD-CB2007 Part 5 or 7 as applicable.

For Member NCB(s) located in the same country where Regulatory Requirements, National Differences, Special National Conditions and Group Differences apply, it is the responsibility of the Member NCB(s) to coordinate, nationally, in order to provide the required information to the IECEE Secretariat once.

Of course the NCB must coordinate with their Member Body or the IEC National Committee to make sure that they are provided with the appropriate information.


Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No, 1 (2007-01-12)

BATT - Batteries

IEC 62282-5-1(ed.1) (2007-02)
Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety

CABL - Cables and Cords No new IEC standard(s) Back to the top

CAP - Capacitors as components

IEC 60384-4(ed.4) (2007-03)
Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO₂) and non-solid electrolyte

IEC 60384-4-1(ed.3) (2007-03)
Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ

IEC 60384-4-2(ed.2) (2007-03)
Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO₂) electrolyte - Assessment level EZ

IEC 60384-18(ed.2) (2007-03)
Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO₂) and non-solid electrolyte

IEC 60384-18-1(ed.2) (2007-03)
Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO₂) electrolyte - Assessment level EZ

CONT - Switches for appliances and automatic controls for electrical household appliances

IEC 60691(ed.3);am1 (2006-09)
Amendment 1 - Thermal-links - Requirements and application guide

IEC 60730-1(ed.3);am2 (2007-01)
Amendment 2 - Automatic electrical controls for household and similar use - Part 1: General requirements

IEC 60730-2-6(ed.2) (2007-02)
Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

IEC 60934(ed.3);am1 (2007-01)
Amendment 1 - Circuit-breakers for equipment (CBE)

EMC - Electromagnetic Compatability

CISPR 16-1-4(ed.2) (2007-02)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances

HOUS - Household and similar equipment

IEC 60335-2-24(ed.6);am2 (2007-01)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers

IEC 60335-2-27(ed.4);am2 (2007-03)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

IEC 60335-2-50(ed.4);am1 (2007-12)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie

IEC 60335-2-53(ed.3);am1 (2007-01)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances

IEC 60335-2-54(ed.3);am2 (2007-01)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam

IEC 60335-2-68(ed.3);am2 (2007-01)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use

IEC 60335-2-70(ed.2);am1 (2007-03)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

IEC 60335-2-71(ed.2);am1 (2007-03)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals

IEC 60335-2-81(ed.2);am1 (2007-01)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats


IEC 60335-2-89(ed.1);am2 (2007-01)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

IEC 60335-2-106(ed.1) (2007-02)
Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings

IEC 61770(ed.1);am2 (2006-03)
Amendment 2 - Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets

INST - Installation accessories and connection devices

IEC 61950(ed.2) (2007-01)
Cable management systems - Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit

LITE - Lighting

IEC 60598-2-8(ed.2);am2 (2007-06)
Luminaires - Part 2-8: Particular requirements - Handlamps

IEC 61347-1(ed.2) (2007-01)
Lamp controlgear - Part 1: General and safety requirements

IEC 62384(ed.1) (2006-08)
DC or AC supplied electronic control gear for LED modules - Performance requirements

MEAS - Measurement, Control and Laboratory equipment

No new IEC standard(s)

MED - Electrical equipment for medical use

IEC 60601-1-2(ed.1) (1993)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests

MISC - Miscellaneous

IEC 60515(ed.2) (2007-02)
Nuclear power plants - Instrumentation important to safety - Radiation detectors - Characteristics and test methods

IEC 61482-1-2(ed.1) (2007-01)
Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)

OFF - IT and office equipment

No new IEC standard(s)

POW - Low voltage, high power switching equipment

IEC 60947-6-2(ed.2);am1 (2007-01)
Amendment 1 - Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

IEC 62019(ed.1) (2007-01)
Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps

PROT - Installation protective equipment

No new IEC standard(s)

PV - Photovoltaics

No new IEC standard(s)

SAFE - Saftey transformers and similar equipment

IEC 61558-2-1(ed.2) (2007-01)
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications

IEC 61558-2-2(ed.2) (2007-01)
Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers

IEC 61558-2-7(ed.2) (2007-01)
Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys

TOOL - Portable tools

IEC 60745-2-16(ed.2) (2007)
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for tackers

Back to the top

TOYS - Electric Toys

No new IEC standard(s)

TRON - Electronics, entertainment

No new IEC standard(s)

NOTE:

If you have a received a request from the industry to certify for any additional IEC standard(s) that is not listed here, that you would like to add to the IECEE CB-Scheme, please send the IECEE Secretariat an email.

WITHDRAWN/REPLACED PUBLICATIONS

Copyright © IECEE 2007. All Rights Reserved.

If you have any questions and/or comments, please contact The IECEE Secretariat.